This is METAFONT, Version 2.7182 (Web2C 7.2) (base=mf 1999.5.2) 7 JUN 1999 21:16
**\mode:=epstylus; mag:=1; nonstopmode; input tctt0500
(/var/spool/texmf/source/jknappen/tc/tctt0500.mf
(/usr/lib/texmf/local/fonts/source/jknappen/ec/exbase.mf)
(/usr/lib/texmf/local/fonts/source/jknappen/tc/tctt.mf
(/usr/lib/texmf/local/fonts/source/jknappen/tc/txsymb.mf
Ok (/usr/lib/texmf/local/fonts/source/jknappen/ec/exaccess.mf
Ok) (/usr/lib/texmf/local/fonts/source/jknappen/tc/txpseudo.mf
Ok) (/usr/lib/texmf/local/fonts/source/jknappen/tc/txaccent.mf
Ok
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_gravis->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
..._beginchar;;adjust_fit(0,0);put_gravis
; ENDFOR
l.34 repeat_once
;
This error message was generated by an `errmessage'
command, so I can't give any explicit help.
Pretend that you're Miss Marple: Examine all clues,
and deduce the truth by inspired guesses.
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_gravis->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
z[jj]top=directionpoint.le...
...;adjust_fit(0,0);put_gravis
; ENDFOR
l.34 repeat_once
;
(That was another `errmessage'.)
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_gravis->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
...;adjust_fit(0,0);put_gravis
; ENDFOR
l.34 repeat_once
;
(That was another `errmessage'.)
[0]
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_accent->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
...fs:1.5fi.u#;adjust_fit(0,0);put_accent
; ENDFOR
l.43 repeat_once
;
(That was another `errmessage'.)
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_accent->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
...;adjust_fit(0,0);put_accent
; ENDFOR
l.43 repeat_once
;
(That was another `errmessage'.)
[1] [2] [3] [4]
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_accent->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
...;if.monospace:hpos_corr=-2u;put_accent
;hpos_corr=2u;put_accent;e...
l.75 repeat_once
;
(That was another `errmessage'.)
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_accent->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
...-2u;put_accent;hpos_corr=2u;put_accent
;else:hpos_corr=-1.5u;put_...
l.75 repeat_once
;
(That was another `errmessage'.)
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_accent->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
...ce:hpos_corr=-2u;put_accent
;hpos_corr=2u;put_accent;e...
l.75 repeat_once
;
(That was another `errmessage'.)
! The direction doesn't occur.
;
directionpoint->..."The direction doesn't occur");
fi.point.a_.of(EXPR3)endgroup
;
put_accent->...]r-z[ii]r}..{z[ii]l-z[jj]l}z[jj]l);
else:pickup.fine.nib;filld...
...ent;hpos_corr=2u;put_accent
;else:hpos_corr=-1.5u;put_...
l.75 repeat_once
;
(That was another `errmessage'.)
[5] [6] [7] [8] [9] [10] [11] [12] [27] [29])
(/usr/lib/texmf/local/fonts/source/jknappen/tc/txgen.mf
Ok [100] [109] [98] [99] [108])
(/usr/lib/texmf/local/fonts/source/jknappen/tc/txsymbol.mf
Ok [13] [18] [21] [22] [23] [24] [25] [26] [28] [31] [32] [36] [39] [44]
[45] [46] [42] [47] [60] [61] [62] [77] [79] [87] [110] [91] [93] [94] [95]
[96] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137]
[138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149]
[150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161]
[162] [163] [164] [165] [166] [167] [168] [169] [171] [172] [173] [174]
[175] [177] [176] [180] [181] [182] [183] [184] [187] [191] [214] [246])
(/usr/lib/texmf/local/fonts/source/jknappen/tc/txromod.mf
Ok [48] [49] [50] [51] [52] [53] [54] [55] [56] [57])
(/usr/lib/texmf/local/fonts/source/jknappen/tc/txrsuper.mf
Ok [185] [178] [179] [170] [186])
(/usr/lib/texmf/local/fonts/source/jknappen/tc/txrfract.mf
Ok
! Arithmetic overflow.
diag_ratio->...)/(EXPR4);a_=(EXPR2)*(EXPR2)-b_*b_;
((EXPR2)*((EXPR5)++(EXPR4)...
l.50 ...pha=diag_ratio(1,diag_stem,y3-y4l,x3r-x4l)
;
Uh, oh. A little while ago one of the quantities that I was
computing got too large, so I'm afraid your answers will be
somewhat askew. You'll probably have to adopt different
tactics next time. But I shall try to carry on anyway.
! Value is too large (-32766.99998).
diag_ratio->...)/(EXPR4);a_=(EXPR2)*(EXPR2)-b_*b_;
((EXPR2)*((EXPR5)++(EXPR4)...
l.50 ...pha=diag_ratio(1,diag_stem,y3-y4l,x3r-x4l)
;
The equation I just processed has given some variable
a value of 4096 or more. Continue and I'll try to cope
with that big value; but it might be dangerous.
(Set warningcheck:=0 to suppress this message.)
! Square root of -32766.99998 has been replaced by 0.
diag_ratio->...((EXPR2)*((EXPR5)++(EXPR4)*sqrt.a_)
-b_*(EXPR5))/a_/(EXPR4)end...
l.50 ...pha=diag_ratio(1,diag_stem,y3-y4l,x3r-x4l)
;
Since I don't take square roots of negative numbers,
I'm zeroing this one. Proceed, with fingers crossed.
! Inconsistent equation (off by 1.5).
;
diag_end->...,y_)=whatever[z(SUFFIX6),z(SUFFIX7)];
if.x(SUFFIX6)>x(SUFFIX3):x...
l.54 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
The equation I just read contradicts what was said before.
But don't worry; continue and I'll just ignore it.
>> (-to_x-1826.19406,1.5)
! Not implemented: length(unknown pair).
;
diag_end->...(EXPR5)*length(z(SUFFIX6)-(to_x,y_));
if.xx_>x_:xx_:=x_:=0.5[xx_...
l.54 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I'm afraid I don't know how to apply that operation to that
particular type. Continue, and I'll simply return the
argument (shown above) as the result of the operation.
>> -1826.19406
>> (-0.5to_x-913.09703,0.75)
! Not implemented: (known numeric)+(unknown pair).
;
diag_end->...(EXPR5)*length(z(SUFFIX6)-(to_x,y_));
if.xx_>x_:xx_:=x_:=0.5[xx_...
l.54 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I'm afraid I don't know how to apply that operation to that
combination of types. Continue, and I'll return the second
argument (see above) as the result of the operation.
>> xx_
>> (-0.5to_x-913.09703,0.75)
! Equation cannot be performed (numeric=pair).
;
diag_end->...(EXPR5)*length(z(SUFFIX6)-(to_x,y_));
if.xx_>x_:xx_:=x_:=0.5[xx_...
l.54 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I'm sorry, but I don't know how to make such things equal.
(See the two expressions just above the error message.)
>> xx_-6.5
! Unknown relation will be considered false.
:
diag_end->...ngth(z(SUFFIX6)-(to_x,y_));if.xx_>x_:
xx_:=x_:=0.5[xx_,x_];fi.fi...
l.54 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
Oh dear. I can't decide if the expression above is positive,
negative, or zero. So this comparison test won't be `true'.
>> xx_
! Undefined x coordinate has been replaced by 0.
{
diag_end->...3)}(x_,y(SUFFIX3))..(xx_,y(SUFFIX3)){
z(SUFFIX6)-z(SUFFIX3)}...{...
l.54 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I need a `known' x value for this part of the path.
The value I found (see above) was no good;
so I'll try to keep going by using zero instead.
(Chapter 27 of The METAFONTbook explains that
you might want to type `I ???' now.)
>> 0.5to_x-913.09703
! Undefined x coordinate has been replaced by 0.
endgroup
l.54 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I need a `known' x value for this part of the path.
The value I found (see above) was no good;
so I'll try to keep going by using zero instead.
(Chapter 27 of The METAFONTbook explains that
you might want to type `I ???' now.)
[188]
> 0 WNW 1 NNW 2 (NNE) ENE 3 (ESE) SSE ESE 0 (ENE NNE NNW)
! Strange path (turning number is zero).
;
bulb->...FFIX0)r-x(SUFFIX1)r,0}z(SUFFIX0)r--cycle;
path_.r:=z(SUFFIX2)l{0,y(S...
l.106 ...l)=whatever[z1l,z2r]; x2l:=x; bulb(2,1,0)
; % bulb and arc
The path doesn't have a counterclockwise orientation,
so I'll probably have trouble drawing it.
(See Chapter 27 of The METAFONTbook for more help.)
[189]
! Arithmetic overflow.
diag_ratio->...)/(EXPR4);a_=(EXPR2)*(EXPR2)-b_*b_;
((EXPR2)*((EXPR5)++(EXPR4)...
l.180 ...ha=diag_ratio(1,diag_stem,y3-y4l,x3r-x4l)
;
Uh, oh. A little while ago one of the quantities that I was
computing got too large, so I'm afraid your answers will be
somewhat askew. You'll probably have to adopt different
tactics next time. But I shall try to carry on anyway.
! Value is too large (-32766.99998).
diag_ratio->...)/(EXPR4);a_=(EXPR2)*(EXPR2)-b_*b_;
((EXPR2)*((EXPR5)++(EXPR4)...
l.180 ...ha=diag_ratio(1,diag_stem,y3-y4l,x3r-x4l)
;
The equation I just processed has given some variable
a value of 4096 or more. Continue and I'll try to cope
with that big value; but it might be dangerous.
(Set warningcheck:=0 to suppress this message.)
! Square root of -32766.99998 has been replaced by 0.
diag_ratio->...((EXPR2)*((EXPR5)++(EXPR4)*sqrt.a_)
-b_*(EXPR5))/a_/(EXPR4)end...
l.180 ...ha=diag_ratio(1,diag_stem,y3-y4l,x3r-x4l)
;
Since I don't take square roots of negative numbers,
I'm zeroing this one. Proceed, with fingers crossed.
! Inconsistent equation (off by 1.5).
;
diag_end->...,y_)=whatever[z(SUFFIX6),z(SUFFIX7)];
if.x(SUFFIX6)>x(SUFFIX3):x...
l.184 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
The equation I just read contradicts what was said before.
But don't worry; continue and I'll just ignore it.
>> (-to_x-1826.19406,1.5)
! Not implemented: length(unknown pair).
;
diag_end->...(EXPR5)*length(z(SUFFIX6)-(to_x,y_));
if.xx_>x_:xx_:=x_:=0.5[xx_...
l.184 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I'm afraid I don't know how to apply that operation to that
particular type. Continue, and I'll simply return the
argument (shown above) as the result of the operation.
>> -1826.19406
>> (-0.5to_x-913.09703,0.75)
! Not implemented: (known numeric)+(unknown pair).
;
diag_end->...(EXPR5)*length(z(SUFFIX6)-(to_x,y_));
if.xx_>x_:xx_:=x_:=0.5[xx_...
l.184 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I'm afraid I don't know how to apply that operation to that
combination of types. Continue, and I'll return the second
argument (see above) as the result of the operation.
>> xx_
>> (-0.5to_x-913.09703,0.75)
! Equation cannot be performed (numeric=pair).
;
diag_end->...(EXPR5)*length(z(SUFFIX6)-(to_x,y_));
if.xx_>x_:xx_:=x_:=0.5[xx_...
l.184 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I'm sorry, but I don't know how to make such things equal.
(See the two expressions just above the error message.)
>> xx_-6.5
! Unknown relation will be considered false.
:
diag_end->...ngth(z(SUFFIX6)-(to_x,y_));if.xx_>x_:
xx_:=x_:=0.5[xx_,x_];fi.fi...
l.184 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
Oh dear. I can't decide if the expression above is positive,
negative, or zero. So this comparison test won't be `true'.
>> xx_
! Undefined x coordinate has been replaced by 0.
{
diag_end->...3)}(x_,y(SUFFIX3))..(xx_,y(SUFFIX3)){
z(SUFFIX6)-z(SUFFIX3)}...{...
l.184 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I need a `known' x value for this part of the path.
The value I found (see above) was no good;
so I'll try to keep going by using zero instead.
(Chapter 27 of The METAFONTbook explains that
you might want to type `I ???' now.)
>> 0.5to_x-913.09703
! Undefined x coordinate has been replaced by 0.
endgroup
l.184 fill diag_end(2r,1r,1,.5,3l,4l)
---z5''...lft z5'
I need a `known' x value for this part of the path.
The value I found (see above) was no good;
so I'll try to keep going by using zero instead.
(Chapter 27 of The METAFONTbook explains that
you might want to type `I ???' now.)
[190]) ) ) )
Here is how much of METAFONT's memory you used:
654 strings out of 5358
6909 string characters out of 71229
38237 words of memory out of 263001
1465 symbolic tokens out of 9500
13i,79n,24r,29p,229b stack positions out of 300i,300n,1000r,150p,3000b
(You used 4w,16h,12d,1i,0l,0k,0e,16p metric file positions
out of 256w,16h,16d,64i,15000l,2500k,256e,60p)
Font metrics written on tctt0500.tfm.
Output written on tctt0500.360gf (128 characters, 6348 bytes).